Products  - TRAPS FOR INSECTS

LEPITRAP1 For the monitoring

TECHNICAL REPORT :

Trap for monitoring of the phytophagoes. This trap for insects is specific for monitoring lepidopters or others small phytofagoes.

CHARACTERISTICS :

Lepitrap 1 is a sloping trap for the monitoring of Lepidopters, Dipterans and other noxious insects and it may be used not only in the open country but also in the closed premises, such as stables, silos and foodstuffs stores. Namely, Lepitrap 1, thanks to its size, is very well versatile and therefore it may be considered a universal trap. It is realized in plastic material and inside there is a replaceable adhesive support. The trap works by putting inside a dispenser, whose attractive persuades the insect to go near the trap, where it remains glued definitively.

INSTRUCTION FOR USE :

Assemble the trap following the instructions written on the package. Put the dispenser containing the attractive in the proper compartment. In the open country put the insects's trap high above, in the closed premises, above the foodstuffs where there is possible to change the air. Fix it in the stablest way.

FIELDS OF APPLICATION :

Lepitrap 1 is a trap for insects (trap for bugs) that may be used for monitoring Lepidopterans and Dipterans. Namely a reduced quantity of traps for each unit of surface allows to monitor the insects' population in order to decide if and when intervene.

INSTRUCTION :

Put the traps high above and when possible above the leafage. The traps have to be fixed in the stablest way avoiding movements caused by the wind. Put the traps in the closed premises where there is a current of air. Pay attention: don't touch the eyes and the mouth with the glue. Keep it away from the children's and the animal's range.

PACKAGES :

Lepitrap 1 may be delivered in the following packages: -LPT 1 K: complete Kit for monitoring one hectare during one season: it is formed by 3 traps, 6 attractive-clispensers, 9 cone-shaped bottoms, monitoring's sheets and fixing's wires; - LPT1: Kit formed by 3 traps, 3 attractive dispensers and 3 glued bottoms; -LPTI-3P: Kit formed by 3traps; - FC9: Kit formed by 9 glued bottoms; - FER6: Kit formed by 6 attractive dispensers.